MPS-HIND LEG SLEEVES DOG

Two separate hind leg Sleeves for wound and bandage protection whilst allowing freedom of movement. Give your furry friend the comfort and freedom dogs deserve for a faster recovery!

  • Recommended by veterinarians
  • Alternative for the collar
  • Replaces a full leg bandage
  • Dogs can move comfortably
  • Safe for dog & environment
  • Must be used in combination with the MPS-TOP Shirt (Sold separately)
  • Light pressure calms most dogs
  • Machine washable & reusable
  • Available in 6 sizes and 1 print
THE SIZING GUIDE

LET'S MEASURE YOUR DOG!

We’re here to help you find the best size MPS-Hind Leg Sleeves for your dog!

 

  • Step 1: Measure the inside of your dogs hind leg
  • Step 2: simply look up the measurements in the chart below

 

If your dog is somewhere between two sizes, we recommend going for the smaller size. Let’s find your dog’s recommended size:

SIZE CALCULATOR

The size of the MPS-Hind Leg Sleeves is measured by the inside length of the leg.

Cm/ Inch
Length leg

Measured from the inside

Unfortunately, we could not find the best size for your dog. Please contact us or consult your nearest veterinarian. Contact us
Close
HOW TO PUT ON?

HOW TO PUT THE MPS- HIND LEG SLEEVES ON?

Supplied as two sleeves left and right secured together with adjustable Velcro® and elastic straps to aid fitting. To ensure placement both hind leg sleeves need to be used, simply connect the integrated and adjustable elastic straps to the rear side loops of the MPS-TOP shirt 4-in-1, purchased separately.

 

  • Step 1: Put the MPS-TOP Shirt 4-in-1 on by inserting the head first followed by each front leg separately into the openings provided.

 

  • Step 2: Close the MPS-TOP Shirt 4-in-1 around the chest with the adjustable Velcro. If you want a more calming effect slightly increase the pressure.

 

  • Step 3: Separate the MPS-Hind Leg Sleeves. Put the recovering leg in the first sleeve and attach the elastic straps to the integrated loops of the MPS-TOP Shirt 4-in-1. Secure the straps firmly.

 

  • Step 4: Put the other leg in the second sleeve and attach both sleeves to each other with the Velcro closure on the back part. Attach the elastic straps firmly to the loops on the MPS-TOP Shirt 4-in-1. On the back part attach them in a straight line. Attach the side straps preferably upwards towards the back.

 

  • Step 5: Link the Sleeves together with the straps under the tail. Secure firmly to prevent movement of the sleeves. Make sure the MPS-TOP Shirt 4-in-1 and the MPS-Hind Leg Sleeves are properly secured.
Close
THE USER MANUAL

HOW TO USE THE MPS-HIND LEG SLEEVES CORRECTLY?

These easy to put on and off MPS-Hind Leg Sleeves are specially designed on the anatomy of dogs and can therefore only be used for dogs. The MPS-HLS can only be used in combination with the MPS-TOP Shirt.

 

  • Important information

The MPS-HLS can only be used in combination with the MPS-TOP Shirt. The MPS-TOP Shirt has integrated loops on the rear side to attach the MPS-HLS. The MPS-HLS has a double layered fabric at the hips, back and front side of the sleeve and is manufactured using a breathable stretchy Cotton/Lycra fabric. Supplied as two sleeves left and right secured with adjustable Velcro and elastic straps to aid fitting. To ensure placement both Hind Leg Sleeves need to be used, simply connect the integrated and adjustable straps to the rear side loops of the MPS-TOP Shirt, purchased seperately.

 

It is important that the straps are firmly secured.

 

Consult your veterinarian when you want to use the MPS-Hind Leg Sleeves for medical purposes. Your veterinarian can recommend a suitable treatment. Keep monitoring your dog regularly to make sure the fit is not too tight. We recommend keeping your dog under supervision of a responsible adult at all times while using the MPS-Hind Leg Sleeves. Please consult your veterinarian if your dog’s behavior is changing or when your dog has excessive licking/chewing habits.

 

  • Washing instructions

For longer usage, it is possible that the print of the MPS-Hind Leg Sleeves and the label could fade over time. With the washing instructions below, this process can be delayed. Washing, maintaining and handling of delivered items always remains the responsibility of the customer.

 

Instructions:

  • Always turn inside out for washing;
  • Fasten all the press studs before washing;
  • We recommend using a laundry bag;
  • Wash the MPS-Hind Leg Sleeves up to a maximum of 90ºC/194ºF;
  • Never put the MPS-Hind Leg Sleeves in the dryer! Hang it out and let it air dry;
  • Do not iron directly over the print and never too hot;
  • Do not use bleach or other chemicals to clean the MPS-Hind Leg Sleeves.

Using bleach and other chemicals can cause irritations to your dog’s wound, surgical area, hotspots or more…!

 

  • Specifications

The soft double layered fabric at the hips, back and front side of sleeve is manufactured using Cotton. The rear side of sleeve is manufactured using a breathable stretchy Cotton / Lycra fabric. The MPS-Hind Leg Sleeves for dogs is toxic/lead free.

 

 

Close
THE RIGHT FIXATION

THE RIGHT FIXATION

Supplied as two sleeves left and right secured together with adjustable Velcro® and elastic straps to aid fitting. To ensure placement both hind leg sleeves need to be used, simply connect the integrated and adjustable elastic straps to the rear side loops of the MPS-TOP shirt 4-in-1, purchased separately.

Close

WHEN TO USE

Alternative for the collar or a bandage

Close

Limits overgrooming or licking one spot

Close

Protects wounds, sutures and bandages

More information coming soon.

Close

When having hotspots or skin conditions

More information coming soon!

Close

Adjustable Velcro fastening

The HLS comes with two sleeves with a Velcro fastening at the top and one strap at the rear to be fastened under the tail to prevent the sleeve from twisting.

The two sleeves must always be worn as otherwise they will twist.

Also, always secure the MPS-HLS® to the MPS-TOP Shirt 4 in 1® as not doing so will cause the MPS-HLS® to slip down while being worn.

Close

Loops for securing MPS-TOP Shirt 4 in 1®

The MPS-HLS® has elastic straps. These straps can be secured as intended on the MPS-TOP Shirt 4 in 1® which has red loops.

Please note! The MPS-HLS® must always be worn in combination with MPS-TOP shirt 4 in 1®.

Close

Double layer soft protection

The sleeves are made of a double layer of material with an extra soft thin Polyester padding at the front for additional protection of the front of the hind leg.

Close

Sleeves and elastic strap

The sleeves have an extra-tight band at the end to ensure it fits snugly around the leg.

The adjustable strap with small hook must be secured under the tail to prevent the sleeve from twisting.

Close

Material specifications

The top side of the MPS-HLS® is made of 100% cotton without stretch and comes with a Velcro® strap to adjust the other sleeve to the dog’s size and secure it.

The elastic strap comes with a small metal hook and adjustable metal buckle. This allows you to secure the sleeve to the MPS-TOP Shirt 4 in 1® and adjust it to take account of the size of the dog.

Close

Original MPS® product

The MPS® logo is always on the right side of the MPS-Hind Leg Sleeves® level with the shoulder. The washing label also has an MPS hologram. Without the yellow logo and the hologram, it is not an original, official product of Medical Pet Shirts Europe B.V.

Close

AVAILABLE PRINT

MPS-HLS print

The fabric isn’t dyed, and no harmful toxics are being used in the process. 100% animal-friendly!  
Close